Drive belt check
Drive belt check
To check the tension of each belt, the following rule of thumb is recommended.
push firmly on the belt with your thumb at a distance halfway between the pulleys and note how far the belt can be pushed or deflected and measure this deflection with a ruler.
The belt should deflect ¼-inch if the distance from the pulley center to pulley center 7 and 11 inches; the belt should deflect ½ inch if the distance from pulley center to pulley center is between 12 to 16 inches.
For all repair procedures just visit homeautopros.com
To check the tension of each belt, the following rule of thumb is recommended.
push firmly on the belt with your thumb at a distance halfway between the pulleys and note how far the belt can be pushed or deflected and measure this deflection with a ruler.
The belt should deflect ¼-inch if the distance from the pulley center to pulley center 7 and 11 inches; the belt should deflect ½ inch if the distance from pulley center to pulley center is between 12 to 16 inches.
For all repair procedures just visit homeautopros.com
posted by MervT at
4:43 PM
>
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home